{"product_id":"armorpoxy-universal-tint-packs-pint-color-additive-for-epoxy-polyaspartic-floor-coatings","title":"ArmorPoxy Universal Tint Packs – Pint Color Additive for Epoxy \u0026 Polyaspartic Floor Coatings","description":"\u003cp\u003eArmorPoxy Universal Tints are pint-sized pigment packs that color a clear floor coating to whatever shade the job calls for. Pour it in, mix it thoroughly, roll it out.\u003c\/p\u003e\n\n\u003ch2\u003eHow Far One Pint Goes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePolyaspartic:\u003c\/strong\u003e one pint tints 2 gallons\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eEpoxy:\u003c\/strong\u003e one pint tints 1.5 gallons\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSold as pints only. Size your order to the coating volume, not the floor area.\u003c\/p\u003e\n\n\u003ch3\u003eBuy One Per Set, and One Spare\u003c\/h3\u003e\n\u003cp\u003eWork out how many gallons you're coating, divide by the numbers above, and round up. Then add one. Running short of pigment partway through a floor isn't like running short of paint — you can't mix a matching batch afterward, and the color break lands wherever you happened to stop. A spare pint is the cheapest insurance on the whole project.\u003c\/p\u003e\n\n\u003ch3\u003eTint the Base Coat, Not the Clear\u003c\/h3\u003e\n\u003cp\u003eColor belongs in the base coat. The topcoat stays clear — that's what gives the floor its depth and what protects the pigment and flake underneath it. Tinting the clear is the most common way this product gets misused, and it flattens the finish you paid for. If you want a solid color with no flake, tint the base and run clear over the top of it.\u003c\/p\u003e\n\n\u003ch3\u003eMixing\u003c\/h3\u003e\n\u003cp\u003eAdd the entire pint to the resin or Part A side and mix 3–5 minutes with a spiral or paddle mixer at slow to medium speed. Scrape the sides and the bottom of the container as you go — under-mixed pigment is the usual reason a floor comes out streaked or shifts shade between batches. When the streaks disappear, keep going another minute; pigment hides in the corners of the pail. If you're running more than one kit, combine and mix all of your Part A together before you start so the color holds consistent across the whole slab.\u003c\/p\u003e\n\u003cp\u003eDo this before you're on the clock. Once Part A and Part B meet you have roughly 15 to 20 minutes of working time with polyaspartic, and that is not the moment to discover your pigment isn't fully dispersed.\u003c\/p\u003e\n\n\u003ch3\u003eWhat It Works With\u003c\/h3\u003e\n\u003cp\u003eFormulated for ArmorPoxy's tintable coatings and compatible with most other manufacturers' tintable epoxy and polyaspartic systems. Not intended for coatings that already ship pre-pigmented.\u003c\/p\u003e\n\n\u003ch3\u003eColor Range\u003c\/h3\u003e\n\u003cp\u003eEight colors: three neutrals (Beige, Khaki Tan, Desert Tan), three grays (Light, Medium, Dark), and two high-visibility safety shades for striping, walkways, and hazard marking.\u003c\/p\u003e\n\u003cp\u003eOne expectation worth setting — pigment over concrete never matches a swatch exactly. The slab underneath influences the final shade, and so does how many coats you run and how thick you lay them. If the exact color matters, because you're matching an existing floor or working to a spec, mix a small batch and test it on a scrap of concrete or an out-of-the-way corner before you commit the whole floor.\u003c\/p\u003e","brand":"ArmorPoxy","offers":[{"title":"Beige","offer_id":53860465901792,"sku":"MS-PIG-271045","price":29.0,"currency_code":"USD","in_stock":true},{"title":"Khaki Tan","offer_id":53860465934560,"sku":"MS-PIG-271055","price":29.0,"currency_code":"USD","in_stock":true},{"title":"Dark Gray","offer_id":53860465967328,"sku":"MS-PIG-271049","price":30.0,"currency_code":"USD","in_stock":true},{"title":"Desert Tan","offer_id":53860466000096,"sku":"MS-PIG-271053","price":29.0,"currency_code":"USD","in_stock":true},{"title":"Medium Gray","offer_id":53860466032864,"sku":"MS-PIG-271061","price":37.5,"currency_code":"USD","in_stock":true},{"title":"Light Gray","offer_id":53860466065632,"sku":"MS-PIG-271057","price":29.0,"currency_code":"USD","in_stock":true},{"title":"Safety Red","offer_id":53860466098400,"sku":"MS-PIG-271400","price":37.0,"currency_code":"USD","in_stock":true},{"title":"Safety Yellow","offer_id":53860466131168,"sku":"MS-PIG-271401","price":37.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0670\/5712\/3552\/files\/ArmorPoxy-Universal-Tint-Pack-Pint-Container-Tintable-Floor-Coating.jpg?v=1786125624","url":"https:\/\/opendoorgarage.com\/products\/armorpoxy-universal-tint-packs-pint-color-additive-for-epoxy-polyaspartic-floor-coatings","provider":"Open Door Garage","version":"1.0","type":"link"}