BendPak HD-9SWX Extra Wide 9,000Lb Capacity 4 Car Lift
by BendPak
Save $400.00
Original Price
$11,595.00
Current Price
$11,195.00
The Ultimate Extended-Length, High-Rise, Double-Wide Car Lift
If you're looking for a little more lifting height, extended-length runways and a lot less column interference, then our HD-9SWX four-post lift is the answer. This super-wide, extended-length model is designed to transform your garage into a state-of-the-art parking facility. It turns that two-car space into a four-car trophy stand. The HD-9SWX is an extended length model with higher rise to provide exceptional clearance underneath. The extra dimensions are particularly useful for parking or servicing long-wheelbase vehicles.
The best thing about this car lift is how easy it is to use. Low-stance vehicles glide onto the runways without risking damage to the chassis. It’s a smart solution for family garages and professional spaces. Auto shops sometimes prefer large lifts like the HD-9SWX because their techs need equipment that allows them to work on virtually anything that rolls through their doors. The 9,000-lb. capacity of this lift (4,500 lbs. max per car, per side) covers sedans and sports coupes. If you do need to step up into the next category of lifting, BendPak has four-post lift options, from the 14,000-lb. capacity HDS-14 series to the 40,000-lb. capacity HDS-40.
NOTE:Comes standard with 1 Kit(pair) of Aluminum Ramps (additional ramps may be purchased but are not provided)
Dual-hub cable sheaves
Dual-hub cable sheaves are more expensive to manufacture, but we'd rather send you home with a quality product than a cheap one. They’re necessary to prevent axles, sheaves and cables from burning out before they should. Our philosophy is that your lift should be the last thing you worry about first thing in the morning.
Multi-level locking positions
Unique service technicians require unique servicing positions; with the HD-9, you can safely lock your four-post lift at varied heights, so you’re never crouching or reaching uncomfortably to perform auto maintenance. If you’re raising the lift for parking purposes, that variation is going to come in handy, depending on how you stack your vehicles.
Heavy-duty aircraft cable
Each four-post lift comes with four lifting cables made from superior-grade stainless steel. Each individual cable is rated to handle 14,400 lbs. This makes their combined rating over 640% of the total capacity. These cables are hidden within the post columns for both the safety and overall streamlined look of the lift. No one wants to see a cable dangling on the outside of a lift. Tuck that thing away!
Electric-hydraulic power system
No need to worry about maintenance on your electric-hydraulic power systems! The controls are all within reach, so you can stop, start and reverse your four-post lift on a dime.
Large base plates
10" x 12" base plates keep your car lift rooted in place for as long as you own it. Make sure the ground is level and you’re good to go!
Caster kit
Ask us about the 4-piece caster kit that fits all our 9K four-post lifts. They turn your stationary lift into a mobile parking and service station. You can even leave a car on top while you move it!
Integrated design
All lifting cables, airlines, safety latches and sheaves are routed internally throughout the car lift. This is a crucial safety feature that also adds significantly to your lift’s curb appeal! (That is, if you have it visible from the curb.)
Low-deck runways
We keep our four-post runways to a low 4.5", so low-stance chassis can be comfortably driven onto the lift.
Longer approach ramps
Not only are our runways low, we extend them farther than others in the industry. This better suits the lifting of sports cars and other low-standing vehicles.
Automatic safety locks
Every BendPak four-post lift is designed with a safety-first mentality. To this end, four locks engage simultaneously as the lift is raised, and a backup locking system catches cable slack in the unlikely event of cable failure.
Specifications
Capacity
- Lifting Capacity* 9,000 lbs. (4,082 kg)
- *Max Capacity / Front Axle 4,500 lbs. (2,041 kg)
- *Max Capacity / Rear Axle 4,500 lbs. (2,041 kg)
Rise
- A - Min. Runway Height: 7" (178 mm)
- B - Max. Rise: 82" (2,083 mm)
- C - Max. Lifting Height: 89" (2,261 mm)
- Time to Full Rise: 65 seconds
Outside Dimensions
- D - Overall Width: 202" (5,131 mm)
- E - Outside Length: 198" (5,029 mm)
- F - Overall Length: 242.5" (6,159 mm)
- G - Height of Columns: 102" (2,591 mm)
Inside Dimensions
- H - Width Between Columns: 192" (4,877 mm)
- I - Drive-Thru Clearance: 178" (4,521 mm)
Runways
- J - Runway Width: 19" (483 mm)
- K - Length of Runways: 188" (4,775 mm)
- L - Width Between Runways: 34.25" (870 mm) or 41" (1,041 mm)
- M - Runway Centerline: 56.25" (1,429 mm) or 62.75" (1,594 mm)
- N - Outside Edge of Runways: 75.25" (1,911 mm) or 81.75" (2,076 mm)
Minimum Wheelbase
- Rated Capacity: 135" (3,429 mm)
- 75% Capacity: 115" (2,921 mm)
- 50% Capacity: 95" (2,413 mm)
- 25% Capacity: 80" (2,032 mm)
Locking
- Locking Positions: 17
- Lock Spacing: Every 4” (102 mm)
Power Unit
- Motor: 220 VAC / 60 Hz / 1 Ph
- Noise: 45 dB
Shipping
- Weight: 3,038 lbs. (1378 kg)
- Dimensions: 205'' x 22'' x 51'' (5,207 mm x 558 mm x 1,282 mm)
Details
- 9,000-lb. maximum lifting capacity
- Freestanding design
- Perfect for parking, storage and service
- Double-wide configuration for quad-vehicle storage
- Four runways
- Super-tall rise
- Extra-long ramp
- Runways accommodate wide or narrow vehicles
- Runways include rail-kit for optional accessories
- Electric / hydraulic power system
- Single hydraulic cylinder mounted underneath runway
- Fully enclosed lifting cables, safety locks and sheaves
- Internal anti-sway slider blocks in each column
- Oversized self-lubricating cable rollers
- Oversized sheave diameter reduces cable fatigue
- High-speed lifting
- Features heavy-duty 3/8" aircraft cable
- Rugged 1.25" roller axles
- Multi-position safety locks in each column
- Adjustable lock ladders
- Runways feature a durable matte finish
- Push-button pneumatic safety release
- Independent backup slack-cable safety latches
- Inside runways adjust for different tread widths
- Customizable power unit location
- Removable approach ramps for additional drive-under clearance
- Optional drive-thru ramps available
- Optional drip trays available
- Optional solid deck available to increase storage capacity
- Optional 4,500-lb. air / hydraulic rolling jacks available
- Comes standard with 1 Kit(pair) of Aluminum Ramps (additional ramps may be purchased but are not provided)
Note: An air supply (minimum: 30 psi / 3 CFM) is required for the safety-lock mechanisms to disengage. It is solely the responsibility of the end-user to provide, install and maintain the air supply.
BendPak lifts are supplied with concrete fasteners that meet the criteria of the American National Standard ANSI/ALI ALCTV-(Current). Buyer is responsible for all charges relating to any special regional structural or seismic anchoring requirements specified by any other agencies or codes such as the Uniform Building Code (UBC) or International Building Code (IBC).